What items should be checked on a vehicle walk around?

What items should be checked on a vehicle walk around?

The checks could include:

  • Fluid levels – engine oil, brakes, clutch, power steering and auto transmission fluids (if relevant)
  • Windscreen washer.
  • Battery – look for signs of corrosion.
  • Ensure all lights are working headlights, brake lights, indicators.
  • Tyre check – pressure, tread, wear and tear such as cuts or bulges.

What should you inspect as you walk around the outside of your car?

Body Condition

  • Checking the Tires. You should also check the tire and wheel condition.
  • Make Sure the Lights are Working. This is simple but absolutely vital for your safety.
  • Seats.
  • Dashboard and Controls.
  • Interior Roof.
  • Fluid Checks.
  • Belts, Hoses, and Connections.
  • The Radiator.

What are the components to be check using the vehicle inspection checklist?

Let’s dive right in.

  • Inspection details: Record the vehicle inspector’s details.
  • Brakes: Check the brakes.
  • Bumpers: Check front bumper.
  • Interior: Check the horn.
  • License and insurance details: Check the operator’s driver’s license.
  • Lights: Check headlights.
  • Mirrors: Check outside mirrors.
  • Tires:

What is a vehicle check in sheet?

A vehicle check sheet is a checklist to ensure safety conditions are met before operating a vehicle. Vehicle safety checklists are typically completed by drivers or fleet managers. They include both inside and outside the vehicle as well as any trailers attached.

When performing a walk around your vehicle where should you start?

Begin by walking clockwise around the vehicle and check:

  1. Each tire as you pass it for damage, cuts or obvious problems including low pressure.
  2. Headlights, taillights and turn signal operation.
  3. Glass and mirror cleanliness and condition.
  4. Look for damage on any part of the vehicle and report it if found BEFORE driving.

Where do I start walking around my car?

Begin by walking clockwise around the vehicle and check: Each tire, as you pass it, for damage, cuts or obvious problems including low pressure.

What do I need to pass a vehicle safety inspection?

Vehicle inspections match the vehicle identification number (VIN) to the vehicle ownership documents to determine the identity of the vehicle, and in some cases verify the vehicle is properly equipped for highway use. If applicable, you will need three items for an inspection:

What do you need to know about vehicle inspection?

Safety checks for registration renewal. Most light vehicles more than 5 years old need a yearly safety inspection report (also known as a pink slip).

  • Unregistered vehicle inspections.
  • Heavy vehicles and crane inspections.
  • Public weighbridges.
  • Would your vehicle pass a safety inspection?

    Your tires are your most critical safety component and are also one of the things most likely to cause you to fail a safety inspection. All tires must be in good condition and have at least 2/32 inch of tread depth remaining. Any tires under this specification must be replaced before your vehicle can pass.

    What are the requirements for car inspection?

    Car seat inspections are by appointment only, no walk-ins will be accepted. All participants are required to follow COVID-Safe protocols. Car Seat Fitting Stations are a free public service funded by the NMDOT TSD and are available to everyone. The child

    Begin typing your search term above and press enter to search. Press ESC to cancel.

    Back To Top