How much does it cost to replace attic fan motor?
Attic fan motor replacement costs $150 to $650 with labor, depending on the size and type. The motor alone costs $50 to $250 for an attic fan or $150 to $300 for a whole-house model. Consider replacing the entire fan if the motor is older than 10 years.
How long do attic fan motors last?
How long do attic fans last? Usually, fan motors last between 10-15 years and when the fan is approaching its replacement age, it is due for a motor replacement.
Why did my attic fan stopped working?
An attic fan that won’t turn on is usually an electrical problem, but it can also be an issue with the fan motor or the thermostat. First, check the circuit breaker that controls the attic fan.
Can attic fan motor be replaced?
Replacing a broken motor will cost about $125 for an attic fan and $50 and $100 for a whole-house model. Professional installation will run an added $80 to $100 per hour. Some pros will charge you a disposal fee to get rid of the broken fan.
Do electricians replace attic fans?
A licensed electrician can ensure that all aspects of your project will be completed correctly. Your pro will help you choose a standard attic ventilation fan, assess your intake and exhaust ventilation, run wiring, make sure exterior installations are weatherproof, and set your fan’s controls and thermostat properly.
How do I know if my ceiling fan motor is bad?
If the ceiling fan motor goes bad, the fan will not spin, there will be a short circuit in the ceiling fan. One more problem due to the bad motor could be humming noise.
How often should an attic fan be replaced?
Attic fans usually last between 10 and 15 years, although some cheaper models can last only around 5 years.
How do I manually turn on my attic fan?
How to Operate an Attic Fan
- Look for the attic fan control box.
- Turn the thermostat dial to the “Cool” setting, choosing the level of cooling you want.
- Run the attic fan during the warmest hours of the day; from late morning to late afternoon.
- Switch off the attic fan by pressing the “Off” switch on the control box.