How do I use BT intercom headset?

How do I use BT intercom headset?

Press and hold the MFB for 2 seconds until you hear a “BEEP” – To go to a phone call during an intercom call – Press and hold the MFB for 2 seconds until you hear a “BEEP” NOTE: Depending on the phone some or all of these functions may not work, or operate differently.

How do I connect my Bluetooth intercom?

Pairing devices with Intercom

1. Go to the menu.
2. Go to the User Settings.
3. In the Paired Devices section tap Add Device.
4. Turn on Bluetooth in the device which you want to add and tap Start Pairing.
5. Select relays for access and tap Next.
6. Choose the device you want to pair with and tap Pair.

How do I connect my intercom helmet?

How to Install an Intercom in a Motorcycle Helmet

1. Figure out where to mount the intercom on your helmet. First, take a look at your helmet.
2. Install the Bluetooth motorcycle helmet speakers.
3. Install the microphone in your helmet.
4. Attach the audio cradle to the outside of your helmet.
5. Install the audio unit on the cradle.

How do I pair Sena with other intercom?

Press and hold the Center Button of two Bluetooth systems for 8 seconds until red LEDs of the both units start to flash rapidly. You will hear a voice prompt saying “Intercom pairing”. 3. Simply tap the Center Button of any one of the two headsets A or B (It doesn’t matter that you choose A or B.)

How do I pair my Beaudens headset?

Power/Intercom Button: Press for 3 seconds to turn on the device. Press for 5 seconds to turn off the device. Press for 8 seconds at the same time to pair two device.

How do I connect my phone to my Sena?

Sena SPH10 Headset (behind head) ON state indicated by a blue LED and ascending tones. Mobile Phone/Other device Pairing: Hold Phone button for 5 seconds until LED flashes red/blue alternately and you hear multiple beeps. Then use your phone/other device to pair to the headset.

How do I pair my Sena 50S with my phone?

Phone Pairing

1. Press and hold the Phone Button for 5 seconds when the 50S is on. Phone Pairing.
2. With your mobile phone in Bluetooth-pairing mode, select Sena 50S in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.

How do you turn off Ejeas Q7?

Auto search & radio, intercom & radio could working at the same time.

1. Press for 1s to open the FM.
2. Long-press for 1s again to turn off the FM.