Why is my innokin not working?
It may be that your device is not making a solid connection with your tank, please unscrew the atomizer and pull out the coil and rebuilt them on, be sure the coil is installed correctly. Please try with a new spare coil. Make sure everything of the tank & device was situated firmly and correctly.
How do you fix a vape that won’t turn on?
Try the following:
- Check if you’ve pressed the power. Check if you’ve pressed the power button too often and turned it off.
- Check if you need to charge it.
- Check for connection issues.
- Check our Battery Safety page.
- Check your atomiser.
- Check your 510 pin.
- Check your coil.
- Check your tank isn’t over tightened.
Why does my Smok vape keep blinking?
Solution: When you see that your Smok Novo not lighting and flashing or blinking blue light, it means that it requires cleaning. At the onset, take out the pod and use a paper towel or brush to clean the connectors on the inside. Likewise, also clean the bottom/base of the pod device to remove dirt/debris.
Why is my Smok vape flashing?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output. 3. Low voltage protection: when battery capacity is lower than 3.3V, the LED light will flash 15 times and the battery will automatically shut down the output.
Why is my vape not working Smok?
SMOK Vape Won’t Turn On If your SMOK vape isn’t turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it’s properly inserted.
Why isn’t my vape working when it’s fully charged?
A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it. You want to be careful to not overtighten or under-tighten your cartridge to your vape pen.