How deep can a circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches. Compact saws can use anywhere from 3 3/8-inch blades up to 6 1/2-inch blades.
How deep will a 10 circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
How deep can a 6.5 circular saw cut?
2 1/16”
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4. Of course more capacity, typically means more weight.
How deep can a 8 circular saw cut?
How Much Depth Can a 7 1/4″ Circular Saw Blade Cut?
| Saw Blade Angle | Cutting Depth In (Inches) | Cutting Depth In (Millimeters) |
|---|---|---|
| 10 | 7/16 | 11 |
| 15 | 5/8 | 16 |
| 20 | 7/8 | 22 |
| 25 | 1 1/16 | 27 |
How deep can a 4 1/2 inch circular saw cut?
A left handed blade design improves cut line visibility while the user can expect a bevel capacity of 0 – 45 degrees. The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees. The saw also features a depth of cut adjustment lever and a 1-1/4″ vacuum adapter.
How deep can a 6 1 2 inch circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It’s perfect for cutting small materials for a small DIY project.
How thick of wood can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
How deep can a 14 inch circular saw cut?
To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
Will a 7 1 4 circular saw cut a 4×4?
Standard circular saws with 7 ¼” blades can only cut 2 ½” deep, so making the cut in a single pass isn’t possible. That means you’ll need to make multiple passes to cut clean through the 4×4, and this can result in a poor finish unless you take steps to ensure your cuts line up perfectly with each other.