How do I setup my Arris TG862?
To Install TG862
- If the modem includes a battery, install the battery with the following procedure:
- Connect the phone cable from one of the telephone ports of the TG862 to the telephone base.
- Connect the Ethernet cable from the Ethernet port of the TG862 to the Ethernet port of the computer.
What is the default IP address for Arris router?
192.168.0.1
Logging into the web interface Open up a web browser (Internet Explorer, for example) and enter the IP address http://192.168.0.1 in your browser’s address bar and press Enter. The Login window will prompt for the router configuration username and password.
How do I reset my Arris TG862 modem?
Factory Reset With The Reset Switch
- Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it.
- Hold down the Reset switch for at least 15 seconds and release it. NOTE: Performing a reset will take the TG862 out of Bridge Mode, if it had been previously enabled.
How do I access my Arris admin?
Typically, you can do this by accessing the device through your wireless or wired home network by connecting to its IP address, http://192.168.0.1. Simply enter that address into the address bar on your browser, whether on your computer, phone or tablet.
Where is the WPS button on my Arris router TG862?
To Establish WPS Push-button Connection Push the WPS button on the side panel of the TG862. The Secure LED will begin to flash. Once the WPS connection has been made, the Secure LED will be solid for a moment, and then will turn off. Verify the wireless client for connectivity.
How do I find my Arris modem IP address?
Open a web browser and visit your router’s IP http://192.168.100.1. http://192.168.1.1.
How do I log into my Arris tg862 router?
Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page appears. NOTE: By default the LAN IP address is 192.168.
How do I reset my Arris router IP address?
Most Arris routers can be reset using the Reset Button.
- Locate the Reset Button on your Arris modem or router (typically found on the back of the device).
- When you locate the button, press and hold it for at least 15 seconds.
- Wait for the reset to complete—this process can take a few minutes.
How do I find the IP address of my modem?
To find your router’s IP address, type cmd in the Windows search bar and press Enter to open the command prompt. Type ipconfig in the command prompt and press Enter to run the command. Scroll through the information until you see a setting for Default Gateway under Ethernet adapter or Wireless LAN adapter.