What size are RSX Type S wheels?
The Acura RSX-TYPE s rims size is 17 diameter, 7 width.
What size are Acura RSX tires?
| 2006 Acura RSX | ||
|---|---|---|
| Rim Size | Tire Sizes | Acura RSX Options |
| 16-Inch | 205-55-16 | Base |
| 17-Inch | 215-45-17 225-45-17 | Type-S |
What size tires are on a 2002 Acura RSX?
P205/55R162002 Acura RSX / Tire size
Will an RSX fit in a 18×9 5?
Yes they do! This 2006 Acura RSX FWD is running Enkei RPF1 18×9. 5 wheels, Federal SS595 225/40 tires with BC Racing Coilovers suspension, and needs Fenders Pulled and Rolled and has Slight rub at full turn. As you can see from the pics this wheel and tire combo can be done!**
What size tire is 205 55R16?
205/55R16 tires are 24.9″ tall, have a section width of 8.1″, and fit wheels with a diameter of 16. The circumference is 78.1″ that translates into 811 revolutions per mile.
What size are Acura RSX lug nuts?
19mm Hex
Dorman – Autograde – Wheel Nut M12-1.50 Open Bulge Seat – 19mm Hex, 21.4mm Length (Part No. 611-183.1)
What does 205 stand for in p205 55R16 91h?
“205″ specifies the tyre’s nominal width in millimetres. The number “55″ refers to the nominal aspect ratio, i.e. the ratio of the tyre’s height to its width. In this case, the height of the sidewall is 55 percent of the nominal width.
What does 55 R mean on a tire?
55 refers to the profile of the tyre, or the distance between the wheel and the edge of the tyre, looking at it from the side. The number is the percentage of the width of the tyre. It is commonly known as the “aspect ratio”. So, the profile of our example tyre is 55% of 205mm, or 112.75mm.
What is 91H on a tire?
The 91H and 91T refer to the tire Load bearing index and speed rating of the tire. (Load Index 91 refers to 1356 Pounds or 615 Kilograms). Typically, the load indexes of the tires used on passenger cars and light trucks range from 70 to 110. The H and T refer to the speed rating of the tire.
What does the 16 stand for in p205 55R16 91H?
The number “16” in the size data refers to the rim diameter in inches (1 inch = 2.54 cm). Load index and speed symbol. “91” is the tyre’s load index (LI). There is a standard conversion table for converting this numerical code to the maximum tyre load.
What does 205 on a tire mean?
The first three numbers (205) indicate the width of the tire tread in millimeters. 60 is the aspect ratio or profile of tire. This is indicated in percentage of the tire width. “R” stands for the construction method of the tire indicating the tire is a radial tire.
Why do RSX’s have hub-centric rings?
So what the wheel manufacturer will do is make the hub size the largest so it will fit over any hub and then a hub-centric ring must be used to make up the difference between the RSX’s stock hub size and the aftermarket rim centerbore size.
What are the RSX Fender sizes?
All of the information below is based on RSX’s with out widebody kits an unrolled fenders. This way everyone will have an idea what works on a stock body, lowered RSX. Also these sizes are without the use of wheel spacers. I hope this helps everyone… ’02-’04: 16×6.5″ with +45mm offset. ’05-’06: 17×7″ with +45mm offset. 16X7: +40.
Will 215/50r17 wheels fit on a 2006 Acura RSX base?
Thanks Rez 17×7.5 wheels with 215/50R17 tires ok with my 2006 acura rsx base? Hi,Ed Araga,yes,it can fit for . 17×7.5 wheels with 215/50R17 tires ok with my 2006 …
Can the offset be negative on the RSX?
For the RSX all of the offsets should be positive (+) I dont see where you would want or need to use a negative offset at all. Offset will change on wheel width too, you wont have the same offset on a 9″ and a 7″ wide wheel and have them fit the same on the same car.