How do I fix the F11 code on my Kenmore washer?
To clear and restart the control follow the these steps: Unplug or turn the circuit breaker off for 10-20 minutes. Reconnect the unit to the power source by turning the breaker back on or plugging the washer back in. Press the Pause/Cancel/Stop button twice to clear the display.
How do I fix the F11 code on my Kenmore stove?
F11 error code means the keypad on the main control is shorted. The only thing you can do is try and reset the electronics by killing power to it at the breaker/fuse panel on your home for one full minute then restore power. If after that the problem persists the main control will need to be replaced.
How do I fix F11 error?
Whirlpool washer error code f11
- Check the integrity of the harness connection with the motor control panel, motor, and central control panel.
- Analyze moving parts for worn out or broken components.
- Check the motor control panel. Examine the main control panel of the Whirlpool washing machine. Test the engine.
What does F11 mean on my washing machine?
If your Hotpoint or Indesit washing machine lights are flashing with an F11 error code or on the digital display, it is generally associated with an emptying or draining problem. If your washer is not draining properly the most likely cause is debris stuck in the filter.
What is a F11 error?
The F11 error means the keypad is shorted which is why the control panel has to be replace to fix it.
Why is my Kenmore stove beeping F11?
The “F11” fault code indicates a Shorted Keypad. Disconnect power to the range, For 10-20 minutes and reapply power. If “F11” returns upon power-up, replace the Electronic Oven Control (EOC). If you do not feel comfortable replacing the EOC, I recommend calling a service technician to diagnose and repair your range.
How do you fix F1 on stove?
On some models it is possible that F1 could also be caused by a keypad problem. In this case it will specify in the tech sheet to power down the oven, disconnect the keypad then power the oven back on, wait for a few minutes to see if the error reappears. If the error reappears it is definitely the control board.
What does F11 mean on LG oven?
When preheat is selected on an LG range—the temperature count on the Control Panel display will show 100F (until the oven begins to exceed that temperature) If the oven does *not* reach 150F within 5 minutes—an “F11” error will be triggered.
How do you clear the F11 code on a Whirlpool Duet washer?
To Fix Whirlpool Duet Washer F11 Error Code the first thing you need to do is check the wiring and connection between the central control unit and the motor control unit. Disconnect the wire at the central control unit from the motor control.
How do you run a diagnostic on a Kenmore washer?
Here is what I did to run a diagnostic.
- With the washer empty, close the door.
- Push “control/on” or “Start”
- Select “Drain/Spin”
- Select “No Spin” by pressing SPIN SPEED touchpad.
- Push “PREWASH” option four times within 5 seconds.
- C:00 should light up and begin the diagnostic.
Why does my washer say DU?
The DU code indicates that the door is unlocked. The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly.