What does service engine soon mean on Pontiac Grand Prix?
Service engine soon means there is a problem with the emissions system. Usually it just means the gas cap isn’t on correctly, but it could be a bigger problem.
How do you reset the service engine soon light on a Pontiac Grand Prix?
To reset your Pontiac Grand Prix change oil soon system after an oil change follow this steps.
- Switch the key to the ON position, do not start the engine.
- Now press and release the accelerator pedal 3 times within 5 seconds.
- If the CHANGE OIL SOON light flashes, the system is resetting.
How do I fix my service engine soon?
Can You Fix The Causes For A Service Engine Soon Light?
- Loose fuel cap. This is by far the cheapest cause for the Service Engine Soon Light to come on. Simply turn off the engine, remove the fuel cap, and tighten it back up again.
- Low fluid levels. You can very easily check and fix this one too, while you’re at home.
How do you reset the service engine soon light on a Pontiac Grand Am?
Off the engine, turn the ignition to on. Once the accelerator pedal has been fully pressed and released 3 times in 10 seconds, close the door and turn it off. Upon hearing the chime confirming the reset has been completed, the CHANGE OIL light appears.
How do you reset the service engine soon light on a 2003 Pontiac Grand Am?
@scull801 , Steve, Turn ignition switch to on without starting the engine. Press the options button on the instrument panel until the service light is displayed, then press reset/set button to show the reset confirmation screen. Turn ignition off. Repeat if message comes back.
How do you turn off the service engine soon light on a Pontiac Grand Am?
How to Reset the Service Engine Soon Light on a Grand Am
- Turn the ignition switch on without starting the engine.
- Press the “Options” button on the instrument panel until the service light is displayed.
- Press the “Set/Reset” button to open the reset confirmation screen. Turn the ignition switch off.
Can I reset my service engine soon light?
To start the process, you will have to disable the service engine light of your vehicle. You can use the scan tool or you can disconnect the battery of your car as well. But the easy and effective way is to use a scan tool. You will need a pen, paper, and a scanning tool to reset your engine soon light.