How do I set my AcuRite weather station?
Press the “ ” button, located on the back of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “▲” or “▼“ buttons (press and HOLD to fast adjust).
How do I reset my AcuRite thermometer?
So, how do I reset my AcuRite outdoor thermometer? The reset button is located within the battery compartment. Press and hold the button for a couple of seconds. After a reset, it will take around 4 hours for readings to appear after you replace the batteries.
How do you set up AcuRite?
- 1 INSTALL SENSOR BATTERIES. In the outdoor sensor battery compartment, install four AA alkaline or lithium* batteries.
- 2 PLUG IN DISPLAY AND CONFIGURE.
- 3 MOUNT SENSOR. Find a suitable place outdoors to mount the AcuRite Iris.
- 2 ACCESS WI-FI SETUP PAGE.
- 3 ADD YOUR WI-FI CREDENTIALS.
- 4 SET UP YOUR MY ACURITE ACCOUNT.
Why is my AcuRite outdoor temperature not working?
If the outdoor temperature is showing dashes or not changing the units may have lost connection or are experiencing interference. Verify that the A-B-C switch in the battery compartments of both the display and sensor are set to the same letter. You may choose A, B, or C; but both units must match to sync up.
How does the AcuRite weather station work?
AcuRite’s patented self-calibrating weather forecasters use a unique algorithm to analyze changes in pressure and temperature over a time period, called Learning Mode, to determine your altitude. The algorithm begins with the global average pressure (29.92 inHg).
How do you turn on the AcuRite thermometer?
THERMOMETER SET-UP: Place batteries in the main unit first. front and back panels at the side seam. send a signal to the main unit. Select temperature display at this time by pressing the “C/ F” button.
Why is my AcuRite not working?
If you’re having this issue, you might not have synced them correctly or you may need to re-sync them. Turn off both units and take out the batteries and power cord. Then, place the units next to one another. Change the A-B-C switch to a new letter on both units.