How do I unlock the OSD Lockout on my HP monitor?
HP Flat Panel Monitor – Locking and Unlocking the On-Screen Display (OSD)
- If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
- If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.
Why is my monitor OSD locked?
This message occurs when the Menu button on the front panel is pressed for more than 10 seconds. OSD lockout prevents the OSD menu from opening on the screen when a button is accidentally pressed. note: The button may be different and the procedure might vary on some monitors.
How do I remove OSD lock?
To remove the OSD Lockout message, release the Menu button (if something was pressing against it), and press and hold the Menu button again for about 10 seconds – until the message goes away.
How do I remove the power button lockout on my HP monitor?
To remove the OSD Lockout message, release the Power button (if something was pressing against it), and press and hold the button again for about 10 seconds, until the message goes away.
How do I unlock my HP power button?
◦ If the power button is locked, press and hold the power button for 10 seconds to unlock the power button function. ◦ If the power button is unlocked, press and hold the power button for 10 seconds to lock out the power button function.
How do you unlock a power button lock?
Press and hold the Power button for 10 seconds to unlock the Power button function.
How do I unlock OSD?
OSD Lock: To lock the OSD Menu press and hold both the [1] button and the up arrow button for 10 seconds. Note: These same buttons, when pressed for another 10 seconds, will unlock the feature. If you have front panel soft touch buttons they are labeled as seen in the image below (Figure 1).
How do I fix my HP power button lockout?
Why is power button locked?
Ensure that nothing on the desk is pressed up against the menu button and holding it down. This is a common cause of the “Power Button Lockout” message appearing. If anything is pressing against the button, move it away, and make sure you keep objects away from the button in the future.
How do you unlock your laptop screen?
Press CTRL+ALT+DELETE to unlock the computer. Type the logon information for the last logged on user, and then click OK. When the Unlock Computer dialog box disappears, press CTRL+ALT+DELETE and log on normally.
What is the OSD lockout button on my monitor?
OSD lockout prevents the OSD menu from opening on the screen when a button is accidentally pressed. The button may be different and the procedure might vary on some monitors. Please check your monitor User Guide to find the exact procedure if this procedure does not work.
What is the operating temperature of the HP lp2275w?
Text Mode 720 × 400 Dot Pitch 0.270 (H) × 0.270 (W) mm Horizontal Frequency 30 to 94 kHz Vertical Refresh Rate 48 to 85 Hz Environmental Requirements Temperature Operating Temperature 5 to 35° C 41 to 95° F Table B-1 HP LP2275w Specifications (continued) HP LP2475w Model 39 Storage Temperature -20 to 60° C -4 to 140° F
How do I fix the power button lockout on my monitor?
Press the front panel power button. NOTE:If pressing the power button has no effect, press and hold the power button for 10 seconds to disable the power button lockout feature. Master power switch on rear panel of the monitor is turned Off. Turn the master power switch to On. Video cable is improperly connected. Connect the video cable properly.
How do I Turn Off the HP display litesaver?
Right-click on the HP Display LiteSaver icon in the system tray. 2. Select Power Off Display from the menu. The monitor screen should turn off if the system is compatible. To turn the monitor back on, wait 5 seconds and move the mouse.