How do you convert torque to force?
The equation, Force = Torque ÷ [Length × sin (Angle)], converts torque into force. In the equation, Angle is the angle at which the force acts on the lever arm, where 90 degrees signifies direct application.
How do you convert torque to axial force?
Axial Force Ff, by using Equation(1) Ff=0.7× y×As 0.7×112×20.1 1576[kgf] A bolt is tightened by torque, torque inclination, rotating angle, stretch measurement and other methods. The torque method is widely used due to its simplicity and convenience.
How do you calculate clamping force from torque?
Bolt Clamping Force (lbs.) Notes: 1. Tightening torque values are calculated from the formula T = KDP, where T = tightening torque, lb-in.; K = torque-friction coefficient; D = nominal bolt diameter, in.; and P = bolt clamping load developed by tightening.
How do you calculate bolt force?
To find the applied shear and tensile forces on a particular bolt, simply multiply the stresses by the area of the bolt being considered. If all the bolts have the same cross sectional area then the force per bolt equals the connection force divided by the number of bolts.
How do you find force with torque and distance?
Torque Formula (Force at a Distance)
- = torque (N∙m)
- = force vector (N)
- = length vector, directed from the center of rotation to the force point (meters)
How do you convert torque to tangential force?
Imagine that a mechanic is pushing on the end of a 0.3-meter-long torque wrench to apply 9 Newton-meters of torque. Calculate the tangential force. F_t = τ/R = 9 Newton-meters/0.3 meters = 30 Newtons.
Can you convert torque to PSI?
PSI is a unit of pressure and cannot be converted to Nm (a torque), but it could be converted to N/m2 which is a pressure. 1 pound per square inch = 1/225 * (39.4)2 = 6.9 N/m2. You can convert just about anything to anything else at this site.
Does thread pitch affect torque?
Thread pitch tends to be more independent of nominal diameter than the other variables. Increasing just thread pitch by 40% cuts tension 5% for a given torque.
What is clamp force?
Clamping force is the force (lbs or kg) needed to hold the mold together during injection and it is applied by the clamping unit of an injection molding machine. It is one of the most overlooked portions of the Injection Molding process.
What is the relation between torque and force?
Torque is defined as Γ=r×F=rFsin(θ). In other words, torque is the cross product between the distance vector (the distance from the pivot point to the point where force is applied) and the force vector, ‘a’ being the angle between r and F.
How to calculate torque to tighten bolts?
– T Target tighten torque (the result of this formula is in inch pounds, dividing by 12 yields foot pounds – K Coefficient of friction (nut factor), always an estimation in this formula – D Bolts nominal diameter in inches – P
How to force a thread to stop?
Thread.Interrupt () signal. A thread in Java could be interrupted by by external callers using the Thread.interrupt () method.
What torque should be used to tighten inch machine screws?
calculating the suggested tightening torque is the same for machine screws as it is for bolts. The values are just smaller. Calculating machine screw tightening torque values The most widely used formula for calculating threaded fastener tightening torque is: T = DKP Where: T = Torque (inch pounds and Newton meters; 1Nm = 9 in.lb.)
How to calculate maximum fastener and screw torque?
– Price – Access to Calculators – Login – Create Materials – Create Cross Sections – Save Files – Reporting