How high should a plow mount be?
Registered. Western recommends 9.5″ to 10″ from ground to center of holes on the “Ears” of the a-frame. If your lower than that – more force is needed to “Trip” the moldboard. Any higher than the 10.5″ and the blade tends to skip over the snow or obsticales – the higher it is the worse job of cleaning it will do.
How much does a Western Unimount plow weight?
there were a couple of different 6.5 Western plows: the most common would be the standard steel 6.5, which was about 560 lbs including the mount. the other would be the sport utility 6.5 which was just 425 neighborhood.
What angle should a snow plow be?
The attack angle can be set to 55 degrees for unpaved or gravel surfaces, and for scooping heavy snow; 75 degrees for plowing paved surfaces and asphalt, and for scraping up ice and hard packed snow; or 65 degrees for all-around plowing surfaces and conditions.
How do you level a snow plow?
Move Bumper Stop forward (one hole at a time) into the Center Section to bring the middle of the plow down. 4. Tighten the Trip Springs. The plow should now be level to the ground.
How do you adjust a snow plow blade?
OK,shoe adjustment in this order.
- Raise plow.
- Remove clip holding shoes.
- Remove shoe.
- Grasp firmly with right hand.
- Throw shoe as far as you can.
Do you offer Western UniMount plow mounts?
We offer a large variety of Western Unimount plow mounts for many different applications and configurations. This includes mounts for Dodge/Plymouth, Chevy/GMC, Ford, and Jeep covering many year makes. Additionally, we have both new and used models available depending on your needs.
Will a Western ultramount and snowex Mount fit on a 2500?
A Western Ultramount and SnowEx Mount (part #67981-2 model 3529.) This kit is for Chevy GMC 2500 and 3500. Also fits the 1500HD (not the normal 1500.) Fits 1999-2013. A Western Ultramount, Blizzard Power Hitch 2 and SnowEx Mount (part #67981-2 model 3529.) This kit is for Chevy GMC 2500 and 3500. Also fits the 1500HD (not the normal 1500.)
Will this power hitch kit fit on a 2500?
A Western Ultramount, Blizzard Power Hitch 2 and SnowEx Mount (part #67981-2 model 3529.) This kit is for Chevy GMC 2500 and 3500. Also fits the 1500HD (not the normal 1500.)
What mounts can I use with the 27170 UniMount adapter?
Driver Side Mount 64142, Passenger Side Mount 64143, 2x Spacers 63424 and Bolt Bag 27982. If you have a Unimount, you can also use this mount with the 27170 Unimount adapter. Here is a link to the parts list for this mount. Here is a link to the Complete Western Installation Instructions for this mount .