What is the legal tyre tread in Qld?
Queensland legislation requires at least 1.5mm of tread depth. Finally, you should inspect your tyres for deep cuts, cracks, blisters or bulges that may cause your tyre to fail and become dangerous.
What are the different tyre speed ratings?
The speed rating of a car tyre indicates the top speed that a tyre is able to safely travel at….Where Can I See My Tyre Speed Rating?
| Speed Rating | Max Speed (Mph) | Max Speed (Kph) |
|---|---|---|
| U | 124 | 200 |
| H | 130 | 210 |
| V | 149 | 240 |
| W | 168 | 270 |
Do tyre speed ratings have to match?
Generally speaking, there’s no problem with fitting new tyres that have a higher tyre speed rating – just note that it will probably cost you more and there may not be any significant benefit. To be legal, your tyre speed rating much match or exceed the maximum speed of your car.
Where can I find speed rating and load?
The speed rating is the letter at the end of the sidewall, after the load index number.
Is 2 mm tyre tread legal?
The legal tyre tread depth for cars in the UK and Europe is 1.6mm across the central three-quarters of the tyre, according to law. The tread must meet this minimum requirement across its complete circumference.
Are 33 inch tyres legal in QLD?
You are also not allowed to fit tyres that are more than 50mm bigger than the factory tyre diameter. For a lot of four wheel drives, 31 inch are standard tyres, so 33 inch tyres are the biggest you can legally fit (or 285’s from 265’s).
Can I put lower speed rated tires on my car?
SPEED RATINGS REFER TO MORE THAN JUST SPEED You can always increase the speed rating of the tires on your vehicle for improved performance, but can never decrease it without reducing the vehicle top speed to that of the lower speed rating selected.
Where do I find my tyre speed rating?
sidewall
Where do I find the tyre speed rating? The speed rating is displayed on the tyre’s sidewall, after the load rating. In this example, the car’s speed rating is W, which indicates that it has been legally approved for use up to 168 mph.
How long do 3mm tyres last?
10,000-20,000 miles
With all the possible variables taken into account, the minimum average period 3mm of tyre tread depth will last before it reaches the legal limit of 1.6mm is between would be 10,000-20,000 miles but it could be considerably more than that.