What is the metric equivalent of rod?
5.029
Metric
| rod to kilometer (km) | 0.005029 |
|---|---|
| rod to meter (m) | 5.029 |
| rod to decimeter (dm) | 50.29 |
| rod to centimeter (cm) | 502.9 |
| rod to millimeter (mm) | 5,029 |
What is grade rod level?
A Grade Rod or leveling rod, is a graduated rod used to determine differences in elevation. Grade Rods can be used with surveyor, optical and laser levels. Grade Rods can be made up of several different materials; however, the most common are made out of: Wood. Plastic.
How do you convert grade rods to inches?
To calculate how many inches in the measurement you have, multiply the decimal by 12. For example, if the measurement is 100.2 feet, multiply 0.2 by 12 to get 2.4 inches.
How big is a 5 rod allotment?
272.25 square feet
That has now been halved again by Ashford Borough council so the standard allotment offered is 5 rods – which is 272.25 square feet, or 30 and a quarter square yards.
What percentage of a foot is 2 inches?
0.167
Inches to Decimals of a Foot Calculator
| Inch | Decimal of a Foot |
|---|---|
| 1 inch | 0.0833 |
| 2 inches | 0.167 |
| 3 inches | 0.250 |
| 4 inches | 0.333 |
What is the length of the surrounding rod or pole?
Distance (length, height or width)
| Measure | Equivalent |
|---|---|
| 12 inches | 1 foot (ft or ‘) |
| 3 feet | 1 yard (yd) |
| 5½ yards | 1 perch, pole or rod |
| 40 poles | 1 furlong |
How do I convert rod to other units?
This is a conversion chart for rod (The American System (US Customary Units) and British Imperial Measures). To switch the unit simply find the one you want on the page and click it. You can also go to the universal conversion page. Enter the value you want to convert (rod). Then click the Convert Me button.
What is the length of a grade rod?
Length in Grade Rods varies greatly. Some rods can extend up to 25 feet; others range around 8 feet tall. When using a Grade Rod, be sure that it is fully extended for the most accurate results. If you find yourself in need of a Grade Rod but cannot afford one, you can always use the old-fashioned method of a strip of wood and a tape measure.
How long is a rod in meters?
The SI base unit for length is the metre. 1 metre is equal to 0.19883878151595 rod. Valid units must be of the length type. A rod is a unit of length, equal to 11 cubits, 5.0292 metres or 16.5 feet. A rod is the same length as a perch [1] and a pole.
How do you read a direct elevation grade rod?
How to Read a Direct Elevation Grade Rod 1 Higher numbers on bottom. Lower numbers on top. 2 Has two sections: upper (front) and lower (back). 3 Can have either form of measurements on it– check your specific DE Rod to know which you have.