What is UNS n04400?

What is UNS n04400?

Monel 400 alloy is a nickel copper alloy which has high strength over a wide temperature range up to 1000 F. It is regarded as being a ductile Nickel-Copper alloy with resistance to a wide variety of corrosive conditions.

Is alloy 400 same as Monel?

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working.

What type of material is Monel?

nickel-copper alloys
Monel, any of a group of nickel-copper alloys, first developed in 1905, containing about 66 percent nickel and 31.5 percent copper, with small amounts of iron, manganese, carbon, and silicon. Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater.

What is the difference between Monel and K Monel?

In aircraft, Monel is used for parts demanding both strength and high resistance to corrosion, such as exhaust manifolds and carburetor needle valves and sleeves. K-Monel is a nonferrous alloy containing mainly nickel, copper, and aluminum. It is produced by adding a small amount of aluminum to the Monel formula.

Is Monel a stainless steel?

Monel is a group of alloys of nickel (from 52 to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. Monel is not a cupronickel alloy because it has less than 60% copper.

How do you identify Monel?

Registered. Monel has a slightly greenish tinge to it, SS is easy to spot, silvery but not overly shiny unless it has been buffed. Monel has better resistance to the salt water environment than SS.

How much does monel cost?

$2.50-$3.00/lb These prices are current as of today’s date and are subject to change, at any time due to outstanding market conditions.

Is monel better than Hastelloy?

Monel and Hastelloy ultimate tensile strength The tensile strength of Monel alloys falls between a range of 550 Mpa to about 1100 Mpa. And in comparison to monel, the tensile strength of several Hastelloy grades falls in between the range of 690 Mpa to about 783 Mpa.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top