What vehicles will my rims fit?
The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.
How do you measure a 10 lug bolt pattern?
All Even-numbered lugs can be determined by simply measuring the distance from the center of one lug hole/stud to the center of the opposite lug hole/stud across the centerbore. This applies to 4, 6, 8 or 10 lug vehicles and wheels.
Why do some wheels have 10 holes?
When a wheel has ten holes drilled in it, it simply has two bolts patterns drilled into the wheel. What you need to ascertain is just what bolt patterns the wheel has. If you are lucky one of them could be 5/110 MM to fit your HHR.
Can you put any size rims on a car?
It depends. Wheels and tires are not interchangeable words. Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.
What size rims fit a Chevy S10?
| 1997 Chevy S10 | |
|---|---|
| Rim Size | Tire Sizes |
| 15-Inch | 205-75-15 235-70-15 235-75-15 31×10.50-15 |
| 16-Inch | 235-55-16 |
What are Unilug wheels?
I just found this post by RustyBolts: “In case the word “Unilug” doesn’t mean anything to somebody, what they did was have oval shaped holes so the same wheels would work with 4-1/2″, 4-3/4″, and 5″ bolt patterns. There were oval shaped countersinks in the wheel around each of the oval holes.
What size lug nuts do I need for my Wheels?
Check your vehicle owner manual for proper specifications. General recommendations by stud size in Ft/Lbs: 12mm = 70-80, 7/16 = 55-65, 1/2 = 75-85, 14mm = 85-95, 9/16 = 95-115, 5/8 = 135-145. It is prudent to re-torque wheels after about 60 to 90 miles (100km to 150km) of driving. Learn more about lug nuts and torque.
A 10 Lug Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count ( 10) and the bolt circle measurement, the notional circle determined by the center position of the studs. Measure 10 lug wheel bolt patterns from center to center distance between two studs that are across the hub from each other.
What is a 5 lug bolt pattern?
A 5 Lug Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count ( 5) and the bolt circle measurement, the notional circle determined by the center position of the studs. Measure 5 lug wheel bolt patterns from the outside edge to center distance between two studs that are across the hub from each other.
What are the most common trailer wheel bolt patterns?
The most common trailer wheel bolt pattern overall is 5 X 4.5 and is also a very popular size in passenger cars. Car makers such as Ford, Mercury, Dodge, Jeep, Mazda, Lexus, Toyota, Honda, Acura and others use 5 X 4.5 wheels, which also makes this a very popular bolt pattern in aftermarket wheels.